View SP491CN-L_8214113.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 features ? +5v only ? low power bicmos ? driver/receiver enable (sp49) ? rs-485 and rs-422 drivers/receivers ? pin compatible with ltc490 and sn7579 (sp490) ? pin compatible with ltc49 and sn7580 (sp49) the sp490 is a low power differential line driver/receiver meeting rs-485 and rs-422 standards up to 5mbps. the sp491 is identical to the sp490 with the addition of driver and receiver tri-state enable lines. both products feature 200mv receiver input sensitivity, over wide common mode range. the sp490 is available in 8-pin plastic dip and 8-pin nsoic packages for operation over the commercial and industrial temperature ranges. the sp491 is available in 4-pin dip and 4-pin nsoic packages for operation over the commercial and industrial temperature ranges. sp490 sp491 description block diagrams now available in lead free packaging full duplex rs-485 transceivers sp490/491
2 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 absolute maximum ratings these are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifcations below is not implied. exposure to absolute maximum rating conditions for extended periods of time may affect reliability. v cc ....................................................................................................+7v input voltages drivers................................................-0.5v to (v cc +0.5v) receivers..................................................................4v output voltages drivers......................................................................4v receivers...........................................-0.5v to (v cc +0.5v) storage temperature....................................................-65?c to +150? power dissipation.....................................................................000mw parameters min. typ. max. units conditions sp490 driver dc characteristics differential output voltage gnd v cc volts unloaded; r = ; see fgure 1 differential output voltage 2 v cc volts with load; r = 50?; (rs422); see fgure 1 differential output voltage .5 v cc volts with load; r = 27?; (rs485); fgure 1 change in magnitude of driver differential output voltage for complimentary states 0.2 volts r = 27? or r = 50?; see fgure 1 driver common-mode output voltage 3 volts r = 27? or r = 50?; see fgure 1 input high voltage 2.0 volts applies to d input low voltage 0.8 volts applies to d input current 0 a applies to d driver short-circuit current v out = high 250 ma - 7v v o +12v v out = low 250 ma - 7v v o +12v sp490 driver ac characteristics maximum data rate 5 mbps driver input to output 30 60 ns t plh ; r diff = 54?, c l = c l2 = 00pf; see fgures 3 and 6 driver input to output 30 60 ns t phl ; r diff = 54?, c l = c l2 = 00pf; see fgures 3 and 6 driver skew 5 ns see fgures 3 and 6, t skew = | t dplh - t dphl | driver rise or fall time 5 40 ns from 0% to 90%; r diff = 54?, c l = c l2 = 00pf; see fgures 3 and 6 sp490 receiver dc characteristics differential input threshold -0.2 +0.2 volts - 7v v cm 12v input hysteresis 70 mv v cm = 0v output voltage high 3.5 volts i o = -4ma, v id = +200mv output voltage low 0.4 volts i o = +4ma, v id = -200mv input resistance 12 15 k? -7v v cm 12v input current (a, b); v in = 2v .0 ma v in = 2v input current (a, b); v in = -7v -0.8 ma v in = -7v short-circuit current 85 ma 0v v o v cc electrical characteristics t min to t max and v cc = 5v 5% unless otherwise noted.
3 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 t min to t max and v cc = 5v 5% unless otherwise noted. parameters min. typ. max. units conditions sp490 receiver ac characteristics maximum data rate 5 mbps receiver input to output 45 50 ns t plh ; r diff = 54?, c l = c l2 = 00pf; figures 3 & 8 receiver input to output 45 50 ns t phl ; r diff = 54?, c l = c l2 = 00pf; figures 3 & 8 diff. receiver skew it plh -t phl i 3 ns r diff = 54?; c l = c l2 = 00pf; figures 3 & 8 power requirements supply voltage +4.75 +5.25 volts supply current 900 a environmental and mechanical operating temperature commercial (c_) 0 +70 c industrial (e_) -40 +85 c storage temperature -65 +50 c package plastic dip (_s) nsoic (_n) figure 3. driver/receiver timing test circuit figure 4. driver timing test load #2 circuit figure . driver dc test load circuit figure 2. receiver timing test load circuit electrical characteristics
4 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 figure 6. driver propagation delays figure 7. driver enable and disable times figure 8. receiver propagation delays
5 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 absolute maximum ratings these are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifcations below is not implied. exposure to absolute maximum rating conditions for extended periods of time may affect reliability. v cc ...................................................................................................+7v input voltages logic.................................................-0.5v to (v cc +0.5v) drivers..............................................-0.5v to (v cc +0.5v) receivers................................................................14v output voltages logic................................................-0.5v to (v cc +0.5v) drivers....................................................................14v receivers.........................................-0.5v to (v cc +0.5v) storage temperature.....................................................-65?c to +150 power dissipation.................................................................1000mw t min to t max and v cc = 5v 5% unless otherwise noted. parameters min. typ. max. units conditions sp491 driver dc characteristics differential output voltage gnd v cc volts unloaded; r = ; see fgure 1 differential output voltage 2 v cc volts with load; r = 50?; (rs422); see fgure 1 differential output voltage .5 v cc volts with load; r = 27?; (rs485); see change in magnitude of driver differential output voltage for complimentary states 0.2 volts r = 27? or r = 50?; see fgure 1 driver common-mode output voltage 3 volts r = 27? or r = 50?; see fgure 1 input high voltage 2.0 volts applies to d, reb, de input low voltage 0.8 volts applies to d, reb, de input current 0 a applies to d, reb, de driver short-circuit current v out = high 250 ma - 7v v o 12v v out = low 250 ma - 7v v o 12v sp491 driver ac characteristics maximum data rate 5 mbps reb = 5v, de = 5v driver input to output 30 60 ns t plh ; r diff = 54?, c l = c l2 = 00pf; vhhjxuhvdg driver input to output 30 60 ns t phl ; r diff = 54?, c l = c l2 = 00pf; vhhjxuhvdg driver skew 5 0 ns vhhjxuhvdg t skew = | t dplh - t dphl | driver rise or fall time 5 40 ns from 0% to 90%; r diff = 54?, c l = c l2 = 00pf; vhhjxuhvdg driver enable to output high 40 70 ns c l = c l2 = 00pf; vhhjxuhv 4 and 7; s 2 closed driver enable to output low 40 70 ns c l = c l2 = 00pf; vhhjxuhv 4 and 7; s closed driver disable time from low 40 70 ns c l = c l2 = 00pf; vhhjxuhv 4 and 7; s closed driver disable time from high 40 70 ns c l = c l2 = 00pf; vhhjxuhv 4 and 7; s 2 closed electrical characteristics
6 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 t min to t max and v cc = 5v 5% unless otherwise noted. parameters min. typ. max. units conditions sp491 receiver dc characteristics differential input threshold -0.2 +0.2 volts - 7v v cm 12v input hysteresis 70 mv v cm = 0v output voltage high 3.5 volts i o = -4ma, v id = +200mv output voltage low 0.4 volts i o = +4ma, v id = -200mv three state (high impedance) output current 1 a 0.4v v o 2.4v; reb = 5v input resistance 12 15 k? -7v v cm 12v input current (a, b); v in = 2v .0 ma de = 0v, v cc = 0v or 5.25v, v in = 2v input current (a, b); v in = -7v -0.8 ma de = 0v, v cc = 0v or 5.25v, v in = -7v short-circuit current 85 ma 0v v o v cc sp491 receiver ac characteristics maximum data rate 5 mbps reb = 0v receiver input to output 20 45 50 ns t plh ; r diff = 54?, c l = c l2 = 00pf; figures 3 & 8 receiver input to output 20 45 50 ns t phl ; r diff = 54?, c l = c l2 = 00pf; figures 3 & 8 diff. receiver skew it plh -t phl i 3 ns r diff = 54?; c l = c l2 = 00pf; figures 3 & 8 receiver enable to output low 45 70 ns c rl = 5pf; figures 2 and 9; s closed receiver enable to output high 45 70 ns c rl = 5pf; figures 2 and 9; s 2 closed receiver disable from low 45 70 ns c rl = 5pf; figures 2 and 9; s closed receiver disable from high 45 70 ns c rl = 5pf; figures 2 and 9; s 2 closed power requirements supply voltage +4.75 +5.25 volts supply current 900 a reb, d = 0v or v cc ; de = v cc sp491 environmental and mechanical operating temperature commercial (c_) 0 +70 c industrial (e_) -40 +85 c storage temperature -65 +50 c package plastic dip (_s) nsoic (_n) figure 9. receiver enable and disable times electrical characteristics
7 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 description the sp490 and sp491 are full-duplex differen - tial transceivers that meet the requirements of rs-485 and rs-422. fabricated with a sipex proprietary bicmos process, both products require a fraction of the power of older bipolar designs. the rs-485 standard is ideal for multi-drop applications or for long-distance interfaces. rs-485 allows up to 32 drivers and 32 receivers to be connected to a data bus, making it an ideal choice for multi-drop applications. since the cabling can be as long as 4,000 feet, rs-485 transceivers are equipped with a wide (-7v to + 2v) com - mon mode range to accommodate ground potential differences. because rs-485 is a differential interface, data is virtually immune to noise in the transmission line. driver... the drivers for both the sp490 and sp491 have differential outputs. the typical voltage output swing with no load will be 0 volts to +5 volts. with worst case loading of 54? across the differential outputs, the driver can maintain greater than .5v voltage levels. the driver of the sp491 has a driver enable control line which is active high. a logic high on de (pin 4) of the sp491 will enable the differential driver outputs. a logic low on de (pin 4) of the sp491 will tri-state the driver outputs. the sp490 does not have a driver enable. receiver... the receivers for both the sp490 and sp491 have differential inputs with an input sensitiv - ity as low as 200mv. input impedance of the receivers is typically 15k? (12k? minimum). a wide common mode range of -7v to + 2v allows for large ground potential differences between systems. the receivers for both the sp490 and sp491 are equipped with the fail-safe feature. fail-safe guarantees that the receiver output will be in a high state when the input is left unconnected. the receiver of the sp491 has a receiver enable control line which is active low. a logic low on reb (pin 3) of the sp491 will enable the differential receiver. a logic high on reb (pin 3) of the sp491 will tri-state the re - ceiver.
8 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 p ackage: 8 pin nsoic a a1 a2 side view seating plane section b-b with pla ting symbol min nom max a 1.35 - 1.75 a1 0.1 - 0.25 a2 1.25 - 1.65 b 0.31 - 0.51 c 0.17 - 0.24 d e e1 e l 0.4 - 1.27 l1 l2 ? 0o - 8o ?1 5o - 15o note: dimensions in (mm) 8 pin nsoic jedec mo-012 (aa) variation 4.90 bsc 6.00 bsc 3.90 bsc 1.27 bsc 1.04 ref 0.25 bsc gauge plane l1 l ? ?1 ? seating plane l2 view c t op view b see view c b b e e/2 e1 index area (d/2 x e1/2) e1/2 d 1 e c base met al b
9 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 p ackage: 14 pin nsoic t op view b gauge plane l1 l ? ?1 ? seating plane l2 view c see view c b b section b-b with pla ting c base met al b a a1 a2 symbol min nom max a 1.35 - 1.75 a1 0.1 - 0.25 a2 1.25 - 1.65 b 0.31 - 0.51 c 0.17 - 0.25 d e e1 e l 0.4 - 1.27 l1 l2 ? 0o - 8o ?1 5o - 15o note: dimensions in (mm) 1.27 bsc 1.04 ref 0.25 bsc 14 pin nsoic jedec mo-012 (ab) variation 8.65 bsc 6.00 bsc 3.90 bsc e e/2 e1 index area (d/2 x e1/2) e1/2 d 1 e side view seating plane
0 exar corporation 48720 kato road, fremont ca, 94538 ? (50)668-70 7 ? www.exar.com sp490,49_0_0627 model temperature range package sp490cn-l. ................................................................................... 0?c to +70?c ............................................................................... 8-pin nsoic sp490cn-l/tr .............................................................................. 0?c to +70?c ............................................................................... 8-pin nsoic sp490en-l .................................................................................. -40?c to +85?c .............................................................................. 8-pin nsoic sp490en=l/tr ............................................................................ -40?c to +85?c .............................................................................. 8-pin nsoic sp49cn-l .................................................................................... 0?c to +70?c .............................................................................. 4-pin nsoic sp49cn/tr-l .............................................................................. 0?c to +70?c .............................................................................. 4-pin nsoic sp49en-l .................................................................................. -40?c to +85?c ............................................................................. 4-pin nsoic sp49en-l/tr ............................................................................ -40?c to +85?c ............................................................................. 4-pin nsoic /tr = tape and reel pack quantity is 2500 for nsoic. ordering information notice exar corporation reserves the right to make changes to any products contained in this publication in order to improve design, performance or reliabil - ity. exar corporation assumes no representation that the circuits are free of patent infringement. charts and schedules contained herein are only for illustration purposes and may vary depending upon a user's specifc application. while the information in this publication has been carefully checked; no responsibility, however, is assumed for inaccuracies. exar corporation does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of the life support system or to signifcantly af fect its safety or effectiveness. products are not authorized for use in such applications unless exar corporation receives, in writting, assurances to its satisfaction that: (a) the risk of injury or damage has been minimized ; (b) the user assumes all such risks; (c) potential liability of exar corporation is adequately protected under the circumstances. copyright 20 exar corporation datasheet may 20 send your serial transceiver technical inquiry with technical details to: serialtechsupport@exar.com reproduction, in part or whole, without the prior written consent of exar corporation is prohibited. revision history date revision description 02/24/05 - sipex legacy data sheet 07/4/08 .0.0 convert to exar format. june 20 .0. remove minimum entry to driver short circuit current. change sp490 receiver propagation typical to 45ns. remove sp49 receiver short circuit current minimum entry. change sp49 receiver propagation delay min and typ levels to 20 and 45ns respectively. change sp49 receiver enable and disable time typ and max levels to 45 and 70ns respectively. change sp49 supply current typ to 900a. remove sp49 driver rise/fall time minimum. update ordering information.
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: exar: ? SP491CN-L? sp490cn-l? sp491en-l? sp490en-l? SP491CN-L/tr? sp491en-l/tr? sp490en-l/tr? sp490cn- l/tr? sp490es-l? sp491es-l

▲Up To Search▲

Price & Availability of SP491CN-L

	To Download SP491CN-L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .